UV laser marking machine-Laser marking machine-UV laser marking machine

UV laser marking machine

Ultraviolet laser has a very small focused spot and minimal heat-affected zone, so it can perform ultra-fine marking and special material marking. It is the product of choice for customers who have higher requirements on the marking effect. Ultraviolet laser does not generate heat. Marking and cutting results are precise, smooth, and the sidewalls are straight. There will be no thermal effects and no scorching problems. Except for copper

Description

Main advantages
Ultraviolet laser has a very small focused spot and minimal heat-affected zone, so it can perform ultra-fine marking and special material marking. It is the product of choice for customers who have higher requirements on the marking effect. Ultraviolet laser does not generate heat. Marking and cutting results are precise, smooth, and the sidewalls are straight. There will be no thermal effects and no scorching problems. Except for copper, many materials absorb ultraviolet light at 355nm. The UV laser is suitable for processing more material types.

Sample show

Technical characteristics
· Good beam quality, smaller focusing spot, and super fine marking;
· Most materials can absorb UV laser, so it has a wider range of applications;
· The heat-affected area is extremely small, no thermal effect will occur, and no problem of material scorching;
· Fast marking speed and high efficiency;
· The whole machine has stable performance, small size and low power consumption.

Application area
It is mainly used in the high-end market for ultra-fine processing. The surface of packaging bottles for cosmetics, medicines, foods and other polymer materials has a fine effect, clear and firm markings, better than ink coding and no pollution; flexible PCB board marking, marking Chip; microwafer and blind hole processing of silicon wafer; LCD liquid crystal glass two-dimensional code marking, glassware surface marking, metal surface plating marking, plastic keys, electronic originals, gifts, communication equipment, building materials, etc.

Product parameters

project name	Technical Parameters
Maximum laser average power：	1.5/3/5/10
Laser repetition frequency:	0-100K
Minimum Q-switched laser pulse width:	30ns
Q-switched peak power:	5KW
Laser wavelength:	355nm
Beam quality M2:	＜1.2
Beam divergence angle:	＜3mrad
Standard engraving range:	50*50
Carving line speed:	10000mm/s
Minimum line width:	0.01mm
Repeat accuracy:	±0.003mm
electricity demand:	220V±22V/50Hz/15A
Machine power consumption:	3KW
Operating temperature:	15-30°C
Relative humidity:	＜80%
Dimensions(L×W×H):	1240x840x1510mm

Trust Laser is a laser equipment manufacturer

UV laser marking machine